OSHA Hearing Conservation Checklist: Annual Audiograms
July 6, 2026 · 7 min read
By Jeff Schroeder, Foster Special Instruments
If any employee's noise exposure reaches an 8-hour time-weighted average of 85 decibels, OSHA's action level, 29 CFR 1910.95 requires you to run a hearing conservation program. Not just offer earplugs: a program, with monitoring, audiometric testing, training, and records that survive an audit. See Foster's audiometer calibration service for what is covered.
Here is the whole standard reduced to a working checklist, in the order an inspector would walk it.
1. Noise monitoring: know who is in the program
The program starts with exposure monitoring. When information indicates any employee may be exposed at or above the 85 dBA action level, you must develop and implement a monitoring program that identifies every employee for inclusion. Monitoring must be repeated when changes in production, process, or equipment could increase exposures.
- Identify every employee at or above 85 dBA (8-hour TWA)
- Re-monitor after process or equipment changes
- Notify each monitored employee of the results
- Allow employees or their representatives to observe monitoring
2. Baseline audiogram: within 6 months of first exposure
Every employee in the program needs a baseline audiogram within 6 months of their first exposure at or above the action level. (If you use a mobile test van, the standard extends this to one year, but requires hearing protection after the first 6 months until the baseline is done.) Employees should avoid workplace noise for at least 14 hours before the baseline test.
The baseline is the reference every future audiogram is compared against. Get it early and get it clean.
3. Annual audiogram: every year, no gaps
After the baseline, each covered employee needs a new audiogram at least annually. This is where most programs quietly fall out of compliance: a missed year is a violation you cannot retroactively fix, and it leaves you blind to hearing shifts you were required to catch.
On-site testing during the shift is how high-coverage programs stay complete, no scheduling employees to drive to a clinic, no stragglers. Foster runs this as on-site mobile hearing testing.
How often must audiometric testing be repeated?
Establish the baseline audiogram within 6 months of an employee's first exposure at or above the 85 dBA action level (1910.95(g)(5)(i)). If you use a mobile test van, the baseline may be delayed to 1 year, but hearing protectors must be worn for any period beyond 6 months after first exposure until the baseline is obtained (1910.95(g)(5)(ii)). After the baseline, audiometric testing must be repeated at least annually for every employee in the program (1910.95(g)(6)).
4. Standard threshold shift (STS): the part with deadlines
Each annual audiogram must be compared to the baseline to check for a standard threshold shift: an average change of 10 dB or more at 2000, 3000, and 4000 Hz in either ear. When an STS shows up, the clock starts:
- Employee must be notified in writing within 21 days of the determination
- Employees not already using hearing protectors must be fitted, trained, and required to use them
- A retest within 30 days may be substituted for the annual audiogram if you choose
- An audiologist, otolaryngologist, or physician must review problem audiograms and determine whether referral is needed
- If the shift is persistent, the annual audiogram may be revised to become the new baseline, a determination for the reviewing professional, not the file clerk
5. Hearing protection: provided, fitted, and enforced
Hearing protectors must be made available at no cost to every employee exposed at or above the action level, and their use is mandatory for anyone exposed at or above the 90 dBA permissible exposure limit, anyone who hasn't had a baseline yet, and anyone who has had an STS. Employees must be given a suitable selection and trained in fitting, use, and care. The protectors must attenuate exposure to acceptable levels, which means someone has to actually evaluate attenuation, not just hand out foam plugs.
6. Annual training: every year, three required topics
Everyone in the program must be trained annually on: the effects of noise on hearing; the purpose, advantages, disadvantages, and attenuation of hearing protector types (plus selection, fitting, use, and care); and the purpose and procedures of audiometric testing.
7. Records: what an auditor asks for first
Exposure measurement records must be retained for two years; audiometric test records for the duration of the affected employee's employment. Audiometric records must include the employee's name and job classification, the date, the examiner, the date of the last acoustic or exhaustive calibration of the audiometer, and the employee's most recent noise exposure assessment.
That calibration date requirement is why your audiometer's annual calibration certificate is part of your hearing conservation file, not just the instrument's paperwork. For the wider list, see what an OSHA inspector wants to see first in an inspection.
Foster runs the entire 1910.95 program on-site, audiograms, STS handling, audiologist review, notifications, and records. Headcount, shifts, and ZIP gets you a price in two minutes.
FAQ
Audiometric hearing tests take place within 6 months of a worker's first exposure. Testing must be repeated at least how often?
Annually. Not weekly, not monthly, and not every 2 years. Under 1910.95(g)(5)(i) the baseline audiogram is established within 6 months of an employee's first exposure at or above the 85 dBA action level, and under 1910.95(g)(6) a new audiogram must be obtained at least annually after the baseline for each employee exposed at or above an 8-hour TWA of 85 decibels.
What happens if the annual audiogram shows a standard threshold shift?
The employee must be informed of the shift in writing within 21 days of the determination (1910.95(g)(8)(i)). Employees not already using hearing protectors must be fitted, trained, and required to use them.
Does a mobile test van change the 6 month baseline deadline?
Yes. When a mobile test van is used, the baseline may be obtained within 1 year of first exposure, but hearing protectors must be worn for any period beyond 6 months after first exposure until the baseline is obtained (1910.95(g)(5)(ii)).
Get a price for your program
Foster runs the entire 1910.95 program on-site: audiograms, STS handling, audiologist review, notifications, and records. Headcount, shifts, and ZIP get you a price in two minutes.
Related guides
Switching Mobile Hearing Testing Vendors Without Losing Your Baselines
Changing mobile hearing testing vendors does not reset baselines. What records to pull from the old vendor, who owns them, and how to time the switch.
6 min read Read →Hearing ConservationWhen Does OSHA Require a New Noise Survey? 1910.95(d)(3)
OSHA requires repeat noise monitoring when a change raises exposure enough to add employees or defeat hearing protectors. The triggers, explained.
6 min read Read →Hearing ConservationNo-Show Policy for Mobile Hearing Testing: Keeping Every Employee on the Annual Audiogram
How to write a no-show policy for mobile hearing testing days so missed appointments get rescheduled, documented, and closed before the OSHA annual deadline.
6 min read Read →